QUANTUM DIP

Code: 4810

An easy to apply, non-toxic, non-flammable, oil based dip finish. It exhibits a high degree of water and scuff resistance as it binds the wood fibres together to protect against moisture attack.

Call

Clear All

Status: Out Of Stock

Features

Features

  • Easy to use, coats all surfaces evenly

  • Penetrates and conditions the timber, whilst retaining the natural surface texture and grain of the timber

  • Helps prevent shrinking and swelling of timber, which can cause cupping and warping

  • Non-toxic, low odour and water clean-up

  • No sanding required

  • Time saving, increase efficiency in production

  • Topcoat with other Quantum products, if required

  • Environmentally responsible – made from bio based, ecologically sustainable products

Specifications

Specifications

Colour : Natural or Tinted to one of Quantum’s Transparent Stain Colours

Gloss : N/A

VOC : <75g per litre

Coverage : 6m² per litre on rough sawn timber depending on the porosity of the timber

Drying : Air Dry (In cooler or humid conditions drying times will be longer. Do not apply if temperature is below 15°C or above 30°C)

Clean Up : Water

Packaging : 20L, 200L & 1000L (MTO)

Tech Data Sheet

Tech Data Sheet

Data Sheet

Safety Data Sheets

Mirotone Warranty Information

Application

Application

Preparation : Good preparation is key to a professional looking, long lasting finish.

Tools : Dip application

Application :

Immerse pre-cut timber into dipping tank for 10 -15 seconds to deeply penetrate timber finish, remove then leave to drip-dry.

Where to Use

Where to Use

Interior or exterior applications such as furniture, children’s cubby houses, timber chips, timber screens/blinds, windows and doors, timber sleepers, pergolas and pre-finished decking.

To top