POWER CLEAN

Code: 4910

POWER CLEAN oil and sealer remover is ideal for removing oil treatments, sealers and weathered oil based finishes from external timber surfaces. Apply undiluted POWER CLEAN to a wet surface using a garden spray, brush or roller (no thinning is required).
FromAU$83.24

Status: In Stock

Features

Features

  • Removes weathered oil based finishes, stains, treatments and sealers in as little as 10 minutes

  • Apply on any exterior timber surface

Specifications

Specifications

Coverage : Approx. 10m² per litre

Clean Up : Water

Packaging : 4L & 10L

Tech Data Sheet

Application

Application

Note: Failure to thoroughly remove the cleaning solution may result in timber discolouration under clear finishes.

 

Application :

Wet surrounding areas and plants before starting. Apply undiluted POWER CLEAN to wet surface using a garden spray, brush or roller. (No thinning required).

Allow POWER CLEAN to remain wet on the surface for approximately 10 minutes. (Do not let the product dry on the surface).

Using a stiff bristle broom, scrub the surface to see if the coating has lifted.

Use a strong jet of water or pressure wash to rinse the surface of the timber. Repeat if necessary.

Follow up with DEX PREP to neutralise the timber and rid the surface of any darkening which may occur in the cleaning process. (1L DEX PREP : 1L Water).

Where to Use

Where to Use

All exterior timber surfaces.

To top