MICROFLOOR

Code: 4370

A water based, single pack, tannin resistant, clear urethane floor finish.
FromAU$203.39
Clear All

Status: In Stock

Features

Features

  • Fast drying, apply multiple coats in one day.

  • Tannin blocking.

  • Very smooth flow and self-levelling finish.

  • Non-toxic and low odour.

  • Complies with the Green Building Council Australia: Green Star – Office Design v3 & Office As Built v3, Table IEQ-13.1: Maximum TVOC Content Limits for Paints, Varnishes and Protective Coatings (Maximum limit for “One and two pack performance coatings for floors “EU Directive” – 140 g/L).

Specifications

Specifications

Colour: Clear

Gloss: Matt, Satin & Gloss

VOC: <96g per litre. Refer to VOC certificates for more information. VOC is dependent on gloss level

Coverage: First coat – 10-12m2 per litre. Subsequent coats up to 16m2 per litre

Drying: Touch Dry – 30 minutes. Recoat – 2 hours. Light foot traffic: 16 hours. Normal traffic – 72 hours. (In cooler or humid conditions drying times will be longer)

Clean Up: Water

Packaging: 4L & 10L

Tech Data Sheet

Tech Data Sheet

Data Sheet

Safety Data Sheets

Mirotone Warranty Information

Application

Application

Preparation :  Good preparation is key to a professional looking, long lasting finish

 

Tools: Brush or roller (medium nap) application

 

Application: 

Ensure the surface is free of dirt, grease and loose material.

Fill holes with wood filler and allow to dry.

Sand to a smooth finish in the direction of the grain, remove dust.

If required apply AQUASTAIN in the colour of your choice.

Applying a minimum of 3 coats of MICROFLOOR, sanding between coats with 240 grit paper

Previously coated timber: sand off all old coating before applying MICROFLOOR. Follow directions above. Note: always test recycled timber for adhesion prior to full application.

Where to Use

Where to Use

Interior timber floors and trims.

To top