Javascript seems to be disabled in your browser.You must have JavaScript enabled in your browser to utilize the functionality of this website.
Welcome Guest
+61 2 9795 3700
CLICK HERE FOR NZ SITE
Status: Out Of Stock
Zoom
Easy to use, coats all surfaces evenly
Penetrates and conditions the timber, whilst retaining the natural surface texture and grain of the timber
Helps prevent shrinking and swelling of timber, which can cause cupping and warping
Non-toxic, low odour and water clean-up
No sanding required
Time saving, increase efficiency in production
Topcoat with other Quantum products, if required
Environmentally responsible – made from bio based, ecologically sustainable products
Colour : Natural or Tinted to one of Quantum’s Transparent Stain Colours
Gloss : N/A
VOC : <75g per litre
Coverage : 6m² per litre on rough sawn timber depending on the porosity of the timber
Drying : Air Dry (In cooler or humid conditions drying times will be longer. Do not apply if temperature is below 15°C or above 30°C)
Clean Up : Water
Packaging : 20L, 200L & 1000L (MTO)
Data Sheet
Safety Data Sheets
Mirotone Warranty Information
Preparation : Good preparation is key to a professional looking, long lasting finish.
Tools : Dip application
Application :
Immerse pre-cut timber into dipping tank for 10 -15 seconds to deeply penetrate timber finish, remove then leave to drip-dry.
Interior or exterior applications such as furniture, children’s cubby houses, timber chips, timber screens/blinds, windows and doors, timber sleepers, pergolas and pre-finished decking.