In the same way that oils, stains, paints and films already present in the timber need to be removed prior to application of QUANTEC, non-drying mineral oils will also need to be removed using POWER CLEAN prior to application of QUANTEC. Quantum Timber Finishes have you covered with easy to use, surface preparation systems to
QUANTEC works by penetrating the timber, and binding the wood fibres at the surface of the timber to protect against moisture. This helps prevent swelling, cupping, splitting and warping. The benefit of using QUANTEC to protect your timber, is that unlike non-drying mineral oils QUANTEC does not stay wet on the surface while it is
As a general guide QUANTEC requires re-application every 6-12 months to prevent silvering of the timber and ensure a fresh appearance. Colour durability will vary according to factors such as the porosity of the wood, species, exposure to weather, age and the texture of the timber surface. QUANTEC is a penetrating oil that binds wood
You can skip the weathering process normally required for new timber entirely by using SAP STRIP. SAP STRIP is a powdered timber cleaner used for removing tannins, extractives, mould and mill glaze from all new unpainted timber.