QTHANE is a solvent based, single pack, polyurethane floor coating that has good resistance to household chemicals and wear and tear, recoat time is 16 hours. MICROFLOOR is a water based, single pack urethane coating that is low odour and fast drying (recoat 2 hours). MICROFLOOR is also available as MICROFLOOR Slip Resist 50 which
Lap marks are caused by uneven application and drying of the coating. It is important to choose the correct time of day to apply the coating, as application to hot surfaces will affect the drying. The addition of Quantum’s Wet Edge Extender into coatings will help to overcome the effects of heat and draught during
Bubbling is caused by solvent entrapment, this can happen when air from the timber grain is trapped under the dry film, particularly likely when applying a coating onto a hot floor. Adding Quantum’s Wet Edge Extender into the coating will slow the drying allowing the solvent to be released from the film before it dries.